Produits
- Robbe - 1509 Etais de garde-corps ronds 10PCS
- Rc system DIGGER RC707T truck 4x4 1/10e Brushed RTR EP BLANCHE
- Kyosho SANDMASTER EZ 1/10 KIT EP NOIR
- Réservoir 290cc CALMATO ALPHA 40 SPORTS
- COUPLE CONIQUE 40 DTS FW05/FW06/FAZER/DBX
- PIGNONS DE DIFFERENTIEL V-ONE/DBX/DMT/FW06/MFR
- Roues MHDpro Buggy DIRT Blanc 1/10 de MHDPRO
- Sytème Tracker sonore et visuel pour Quad FPV de MHDFLY
- Sandow de treuillage HLG Multiplex 723385
- Batterie lipo EFLITE 1S 500mAh 3.7V 25C - UMX
- Hélices GEMFAN 5030 / 5x3’’ orange sens horaire CW
- Hélices GEMFAN 5030 / 5x3’’ rouge horaire + anti horaire
- Refroidissement pour moteur Voiture/Bateau LBP 40 Series Car motors. (longueur totale 50mm)
- Moteur brushless Red leopard LBP4082-1600KV 4-Poles Inrunner Car
- Set de protections d’hélices clipsable BLANC pour Dji Phantom 2/3
- Hélices Sky Héro - 6x4.5" Anakin 6 - set de 4
- Kit hélices options - 200 QX
- Kit hélices options 2 pâles - Phantom 2 et 3
- Kit hélices options 6pcs - Phantom 2
- Hélices BULLNOSE Dal 5045 / 5x4.5’’ orange horaire et anti-horaire (4)
- Set autocollants pré-découpé Jazz flame - Phantom 3
- Set autocollants pré-découpé Diamonduse - Phantom 3
- Set autocollants pré-découpé Spider - Phantom 3
- Carte 5 en 1 Alimentation+LED+5V/12V BEC+Alarme Voltage bas +Tracker
- OP Mini OSD avec KV TEAM MOD pour CC3D
- Carte d’alimentation blindée 5V-12V sortie double BEC pour CC3D
- Contrôleur de vol Naze32 AfroFlight 6DOF Rev5
- Système de fixation écran alu pour radio DJI PHANTOM 3/INSPIRE 1
- Nacelle SUPPORT CAMERA G-2D
- HEXAGONE DE ROUE ALLEGE S2 D8/VORZA
- SET SUPPORT MOTEUR E-10
- Hot bodies Q32 D8T TESSMAN RTR
- Tiges d'amortisseurs long traité chrome
- Câble Y parallèle pour batterie Traxxas 1/16 (double l'autonomie)
- Coupe baguettes de MASTER AIRSCEW
- Roues MHDpro Buggy Verte Picots 1/10
- Roues Absima avant gomme Piste Buggy Piste 1/10
- Roues Absima Arrière Gomme Piste Buggy 1/10
- Cloche d'embrayage 15 Dents 1/8 de MHDPRO
- Cloche d'embrayage 14 Dents 1/8 de MHDPRO
- Amortisseur avants/arrières tout ALU 105mm réglable (2 pièce(s) Truggy 1/10E
- Emetteur video 200mw 32ch - KF-58-200 - KDS
- Caméra HD 800TVL - KF-800TVL - KDS
- Antennes Cloverleaf KDS - Trèfles - Spiro TX+RX 5.8GHz
- Set Montage Servo Rotor Queue T-REX 600
- Servo Sanwa SRM-102 3kg/ 0.20s/ nylon
- Servo Graupner C1081 1,2kg/ 0,11s/ nylon
- Servo Micro GRAUPNER 4490 pour héli 47G
- Emetteur vidéo 5.8GHz 25mW 15Ch. Race band Immersion RC
- Multiplex FunCub XL KIT 1700mm



