Contrôleur Basecam simple BGC3.0 32 bits pour nacelle brushless 3 axes

Contrôleur Basecam simple BGC3.0 32 bits pour nacelle brushless 3 axes

BaseCam Simple BGC3.0 32-bit 3-axis/ 3-axle Brushless Gimbal Controller（plastic case)
QA216

Product Details

-32-bit MCU — ARM Cortex M4. Effectively calculates the complex tasks for 3-axis stabilization.
-Allows camera control with the RC or analog joystick.
-Use several switchable profiles for different modes of operation
-Supports variety of RC protocols: PWM, Sum-PPM, spektrum and s-bus.
-Battery voltage monitoring, compensating voltage drop in the PID-regulator.
-Low battery alarm (output to 5V active buzzer).
-Increased number of inputs for controlling signals + 3 additional reserved input/output AUX1-AUX3.
-Can supply up to 1A current for external devices on the 5V power line.
-Dedicated UART-socket to connect optional Bluetooth module
-Reverse-polarity protection, overheat and overcurrent protection
-USB interface for the PC connection, to configure, control and upgrade firmware.
-Graphical user interface to manage the settings. Windows / OS X / Linux versions.
-Control through the Serial-protocol using dedicated API.
-Improved attitude estimation algorythms
-Optional second IMU, that will increase the short-term precision of the stabilization 10x-30x times and  will make stable work in any frame position.

-Size of the board: 50×50 mm
-Distance between the mounting holes: 45 mm
-Diameter of the mounting holes: 3 mm
-Power supply voltage: 8–25 V (3s-5s LiPo)
-Maximum motor current: 1,5 A
-5V output current to power external devices: up to 1 A

http://www.basecamelectronics.com/simplebgc32bit/